0.8 mm or 1 mm laminate, and which finish to pick
Short answer
Use 0.8 mm laminate on vertical surfaces such as wardrobe shutters and side panels. Choose 1 mm for kitchen shutters and home table tops, and 1.25 mm for heavy-use counters. For finish, matt hides fingerprints, gloss looks rich but shows marks, and suede feels soft.




- Should I choose 0.8 mm, 1 mm or 1.25 mm laminate?
- Is 0.8 mm laminate good enough?
- Which laminate finish should I pick?
- Which finish hides fingerprints best?
- What goes under the laminate?
- How do I choose laminate in three steps?
- Laminate or veneer: what is the difference?
- How do I keep laminate looking new?
Should I choose 0.8 mm, 1 mm or 1.25 mm laminate?
The simple rule is vertical or horizontal. Vertical surfaces get touched, horizontal ones get dragged, chopped and hit.
| Thickness | Best for | Avoid on |
|---|---|---|
| 0.8 mm | Wardrobe shutters, side panels, drawer fronts | Table tops and counters |
| 1 mm | Kitchen shutters, home table tops, all-round use | Heavy commercial counters |
| 1.25 mm | Restaurant counters, reception desks, retail tops | Not needed for plain wardrobe sides |
Is 0.8 mm laminate good enough?
Yes, for vertical surfaces where nothing will be dragged across it. A wardrobe shutter, a side panel or a drawer front rarely needs more. For anything you put plates, bags or laptops on, step up to 1 mm.
Which laminate finish should I pick?
Each finish is a family with many designs. These are the main ones we stock:
| Finish | Look and feel | Good for |
|---|---|---|
| Matt | Hides fingerprints and light scratches | Wardrobes, bedrooms |
| Suede | Soft, velvet-like touch | Premium wardrobes, fabric-laminated panels |
| Gloss | Bright and reflective, shows fingerprints | Kitchens that get cleaned daily |
| Mirror (super high gloss) | The shiniest laminate, marks easily | Feature units |
| Texture | 3D feel that imitates timber | A wood look at laminate cost |
| Sparkle | Fine metallic flecks under light | Modern wardrobes |
| Acrylic | Glass-like, deep colour | A lacquered look |
| UV marble | Printed marble pattern, glossy | Wall panels, see the UV marble guide |
For the marble look, read UV marble sheets: where to use them, sizes and care.
Which finish hides fingerprints best?
Matt and suede hide fingerprints best. Gloss, mirror and acrylic show them quickly. If you love gloss for a kitchen, keep a microfibre cloth handy.
What goes under the laminate?
Laminate is only the top skin. A flat, strong base keeps it looking good for years, so choose the board with the same care: plywood or a smooth HDHMR board. Seal the edges with edge banding and use a proper contact adhesive.
Browse the full range in laminates and veneers.
How do I choose laminate in three steps?
- Decide the surface: vertical gets 0.8 mm, horizontal gets 1 mm or more.
- Decide how much cleaning you want to do: matt or suede for low effort, gloss for a bright look.
- Preview colours in the kitchen visualizer, then check a real sample in daylight.
Carry a small piece of the laminate home and look at it in the morning and in the evening. Indoor light in a Delhi flat changes colours a lot, and a shade that looks right under shop lights can look different on your wall. Also check that the finish you like comes in the thickness you need.
Laminate or veneer: what is the difference?
Laminate is a printed, pressed surface that is easy to clean and holds colour well. Veneer is a thin slice of real timber, such as teak, oak or walnut, bonded to a board. Veneer feels natural and ages beautifully, but it needs polish. Laminate asks for much less upkeep.
How do I keep laminate looking new?
- Wipe with a soft damp cloth and mild soap. Skip scouring pads and strong chemicals.
- Do not put hot pans straight on the surface. Use a trivet.
- Fix leaks quickly, because water at the edges lifts the laminate from the base.
- Use a chopping board. Even 1.25 mm laminate scratches under a knife.
Care steps are general guidance for decorative laminate.
Common questions
Is 1 mm laminate better than 0.8 mm?
It is tougher, so it suits surfaces that get touched, dragged or hit, such as kitchen shutters and table tops. For wardrobe shutters and side panels, 0.8 mm is usually enough.
Which laminate finish is best for a kitchen?
Matt or suede finishes hide fingerprints and are easy to live with. Gloss looks rich but shows marks, so it suits kitchens that get wiped daily.
Can laminate go on any board?
Laminate is pasted on a flat base such as plywood, HDHMR or MDF. HDHMR has a smooth surface with no grain, so laminate sits flat. Use the right contact adhesive and edge banding for a lasting finish.
Updated October 2026.

